Yufeng Power: A modern enterprise specializing in the production of high-power, medium- and low-speed diesel engines and low-power steam turbines.
18
2022
-
05
Turbine installation manufacturer: Can steam turbines save fuel?
A steam turbine is a type of steam-powered device primarily used in thermal power plants. As a mechanical equipment, the steam turbine’s energy supply depends not only on the energy provided by steam but also on the substantial power delivered by an adequate supply of lubricating oil. Lubricating oil not only lubricates numerous auxiliary components but is also consumed to some extent during equipment operation. So, how can steam turbines conserve lubricating oil?
Turbine installation manufacturer: Can steam turbines save fuel?
A steam turbine is a type of steam power device, primarily used in thermal power plants. As a mechanical device, Turbine The turbine’s energy supply depends not only on the energy provided by steam but also on the abundant power generated by sufficient oil. Lubricating oil not only lubricates numerous components but is also consumed to some extent during equipment operation. So, how can turbines conserve lubricating oil? Here’s a summary of this issue provided by the turbine installation manufacturer.
Turbine installation manufacturer: Inspect and clean the mating surfaces and internal components of the turbine casing, and keep detailed records. Due to the limited space within the casing for both stationary and rotating parts, extreme care must be taken during maintenance.
Turbine installation manufacturer: Remove the inspection cylinder, remove and trim the plate, and remove the insulation. Once the outer wall temperature of the cylinder drops to the specified temperature, lift the trimming plate, remove the insulation from the inspection cylinder bolts, and proceed with disassembly and reassembly.
Turbine installation manufacturer: Bolt removal Turbine Cylinder bolts are generally removed in the following sequence: low-pressure section, medium-pressure section, and high-pressure section. The tightening sequence is the reverse of this order. First, tighten two bolts symmetrically, then proceed with tightening according to the detailed instructions. Bolt tightening can be divided into cold tightening and hot tightening. High-pressure bolts with large diameters are preferably tightened hot, while bolts for medium- and low-pressure cylinders are mostly tightened cold. During reassembly, the threaded portions of the bolts should be coated with a high-temperature anti-seize compound.
The operating principle of a steam turbine involves the flow of steam, the generation of forces acting on the blades, the formation of losses, and methods for adapting the equipment to changes in external load.
To reduce fuel consumption, an internal inspection must be carried out before using the steam turbine, and the equipment should be operated according to the procedures outlined above. This will help lower fuel consumption, save significant amounts of oil, and reduce the frequency of oil changes. We hope... Turbine The installation manufacturer’s editor’s sharing has been helpful to everyone.
Turbine manufacturer, turbine installation, turbine
Yufeng Power: A modern enterprise specializing in the production of high-power, medium- and low-speed diesel engines and low-power steam turbines.
Contact Us
Phone:
Mr. Sun:
General Tang:
Email:
Address:
Shangzhuang Industrial Park, Sibao Mountain Subdistrict Office, Zibo High-tech Zone