Shandong Turbine Manufacturer: Operating Principle of the Turbine Lubricating Oil Purification and Treatment Unit

Shandong Turbine Manufacturer: The operating principle of a turbine lubricating oil purification system—a complete turbine lubricating oil purification unit consists of an oil tank, filter screens, an oil transfer pump, and a multi-functional oil filter. The primary function of the lubricating oil purification system is to restore the oil’s quality and performance to meet operational standards. After treatment, the oil’s properties remain unchanged...

Turbine installation manufacturer: Can steam turbines save fuel?

A steam turbine is a type of steam-powered device primarily used in thermal power plants. As a mechanical equipment, the steam turbine’s energy supply depends not only on the energy provided by steam but also on the substantial power delivered by an adequate supply of lubricating oil. Lubricating oil not only lubricates numerous auxiliary components but is also consumed to some extent during equipment operation. So, how can steam turbines conserve lubricating oil?

Turbine Installation Manufacturer: Three Types of Steam Inlet Control Methods for Turbines

The steam turbine mentioned by the turbine installation manufacturer is a rotary power machine that converts the energy of steam into mechanical work; it is also known as a steam engine and is primarily used as the prime mover for power generation. It can also directly drive various pumps, fans, compressors, and ship propellers. Moreover, the exhaust steam or intermediate extraction steam from the turbine can be utilized to meet heating demands in both industrial production and daily life. The throttle adjustment method, also referred to as the mass adjustment method, involves the steam entering the turbine through one or more valves that are opened simultaneously...

Turbine Installation Manufacturer: Introduction to the Turbine Thermodynamic System

Turbine installation manufacturer: The turbine's thermodynamic system utilizes steam supplied by the turbine boiler to maintain the turbine's rotational speed (in off-grid operation) or to meet the load demand (in grid-connected operation). After performing its function, the exhaust steam is condensed into water, which, after being extracted and heated, is returned to the boiler. Let our editor from the turbine installation manufacturer take you through an overview of the turbine’s thermodynamic system. The thermodynamic system for the turbine-generator unit is designed based on the basic parameters provided by the customer’s waste-to-energy plant...

What principles should be observed during the operation of a steam turbine?

During the operation of steam turbines, the following principles should be observed: 1. All start-up and shutdown tests conducted after major overhauls, minor repairs, and accident handling must strictly comply with the "Provisional Standards for Regular Maintenance and Inspection of Evaporative Cooling Equipment," with all required measures implemented and passing acceptance inspection; 2. Any practice that fails to meet relevant laws, regulations, or national mandatory standards pertaining to safe production and fire safety shall be deemed a violation, and the contracting unit shall bear full responsibility for such violations...

Power plant steam turbine units: can effectively enhance the high-speed operational stability of generator sets.

The turbine rotor consists of high-pressure and low-pressure sections, which not only increases the number of cylinders and bearings in a power-generation steam turbine unit but also raises the equipment costs. Consequently, the turbine foundation becomes larger, leading to higher civil engineering investment costs. As the overall length of the rotor increases, the vibration performance of the power-generation steam turbine unit will be affected when it operates under off-design conditions, thereby compromising the operational reliability of the unit.